Portable circumferential X-ray flaw detector with SF6 insulation and inverter technology for radiographic inspection of welds.
Overview
This is a portable circumferential X-ray Flaw Detector consisting of an X-ray generator, a controller and a high-voltage cable. It uses SF6 gas insulation and forced air cooling with inverter technology, and features automatic tube warm-up, fault indication, delayed startup and automatic protection. Tube voltage 180350kV, tube current 4.25.0mA, penetrating power 59mm A3 steel, radiation angle 455. Suitable for industrial NDT of welds and castings.
Applications
• Road and highway engineering laboratory testing
• Construction material quality control and acceptance
• Research and teaching laboratories
• Third-party inspection and certification bodies
Features
• Portable and lightweight design for on-site field testing
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
| Item | Specification |
| Input voltage | single-phase AC220V±10%, 50Hz |
| Input capacity | ≤3.4kVA |
| Tube voltage | 180–350kV |
| Tube current | 4.2–5.0mA |
| mA stability | 2% |
| Focal spot | 3.0×3.5mm |
| Radiation angle | 45°±5° |
| Penetrating power (A3 steel) | 59mm |
| Controller size/weight | 365×295×165mm / 12kg |
| Generator size/weight | 345×345×670mm / 37kg |
| Insulation | SF6 gas |
| Cooling | forced air |
| Working pressure | 0.35–0.5MPa |
| Duty cycle | 5min on / 5min off |
Standards
GB/T, JTG, ASTM
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the Portable X-ray Flaw Detector comply with?
A1: The Portable X-ray Flaw Detector is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the Portable X-ray Flaw Detector be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
Overview
This is a portable circumferential X-ray Flaw Detector consisting of an X-ray generator, a controller and a high-voltage cable. It uses SF6 gas insulation and forced air cooling with inverter technology, and features automatic tube warm-up, fault indication, delayed startup and automatic protection. Tube voltage 180350kV, tube current 4.25.0mA, penetrating power 59mm A3 steel, radiation angle 455. Suitable for industrial NDT of welds and castings.
Applications
• Road and highway engineering laboratory testing
• Construction material quality control and acceptance
• Research and teaching laboratories
• Third-party inspection and certification bodies
Features
• Portable and lightweight design for on-site field testing
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
| Item | Specification |
| Input voltage | single-phase AC220V±10%, 50Hz |
| Input capacity | ≤3.4kVA |
| Tube voltage | 180–350kV |
| Tube current | 4.2–5.0mA |
| mA stability | 2% |
| Focal spot | 3.0×3.5mm |
| Radiation angle | 45°±5° |
| Penetrating power (A3 steel) | 59mm |
| Controller size/weight | 365×295×165mm / 12kg |
| Generator size/weight | 345×345×670mm / 37kg |
| Insulation | SF6 gas |
| Cooling | forced air |
| Working pressure | 0.35–0.5MPa |
| Duty cycle | 5min on / 5min off |
Standards
GB/T, JTG, ASTM
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the Portable X-ray Flaw Detector comply with?
A1: The Portable X-ray Flaw Detector is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the Portable X-ray Flaw Detector be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
