Automatic-pressure tester for water impermeability of concrete and mortar, also usable for air permeability checks of building materials.
Overview
It is suitable for measuring and researching the impermeability of concrete and mortar, and can also be used for air permeability testing and quality inspection of building materials.
Applications
• Concrete cube and cylinder compressive strength testing
• Reinforced concrete structural component assessment
• Precast concrete factory quality control
• Construction site and laboratory concrete acceptance testing
Features
• Microcomputer-controlled operation with digital display for direct readout
• Automatic test cycle with data storage and report generation
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
| Item | Specification |
| Max working pressure | 4.0MPa |
| Working mode | automatic constant pressure |
| Specimens per run | 6 |
| Mold | upper φ175mm, lower φ185mm, height 150mm |
| Plunger pump | φ10mm, stroke 10mm, 154/min, 0.11L/min |
| Motor | 90W, 1400r/min |
| Dimensions | 960×650×975mm |
| Total weight | 230kg |
Standards
GB/T 50081, ASTM C39, JGJ/T 384
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the Automatic Concrete Impermeability Tester comply with?
A1: The Automatic Concrete Impermeability Tester is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the Automatic Concrete Impermeability Tester be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
Overview
It is suitable for measuring and researching the impermeability of concrete and mortar, and can also be used for air permeability testing and quality inspection of building materials.
Applications
• Concrete cube and cylinder compressive strength testing
• Reinforced concrete structural component assessment
• Precast concrete factory quality control
• Construction site and laboratory concrete acceptance testing
Features
• Microcomputer-controlled operation with digital display for direct readout
• Automatic test cycle with data storage and report generation
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
| Item | Specification |
| Max working pressure | 4.0MPa |
| Working mode | automatic constant pressure |
| Specimens per run | 6 |
| Mold | upper φ175mm, lower φ185mm, height 150mm |
| Plunger pump | φ10mm, stroke 10mm, 154/min, 0.11L/min |
| Motor | 90W, 1400r/min |
| Dimensions | 960×650×975mm |
| Total weight | 230kg |
Standards
GB/T 50081, ASTM C39, JGJ/T 384
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the Automatic Concrete Impermeability Tester comply with?
A1: The Automatic Concrete Impermeability Tester is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the Automatic Concrete Impermeability Tester be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
