HG-1000S manual tester with digital force display for determining concrete setting time by the penetration resistance method.
Overview
The HG-1000S HG-1000S Digital Concrete Penetration Resistance Tester uses the manual penetration resistance method to determine concrete setting time, with electronic digital force display. The product complies with GB/T 50080, MOT JTGE30 and JT/T 756 standards.
Applications
• Concrete cube and cylinder compressive strength testing
• Reinforced concrete structural component assessment
• Precast concrete factory quality control
• Construction site and laboratory concrete acceptance testing
Features
• Microcomputer-controlled operation with digital display for direct readout
• Large LCD display showing real-time test parameters and results
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
| Item | Specification |
| Specimen mold | upper φ160mm, lower φ150mm, depth 150mm |
| Maximum penetration force | 1000N |
| Penetration depth | 25mm |
| Penetration speed (manual) | 2.5mm/s |
| Needle area | 100mm² / 50mm² / 20mm² |
| Penetration points (selectable) | >13 |
| Force measurement | electronic digital display |
| Minimum division | 1N |
| Indication error | ±10N |
| Power | 220V, 50Hz, 100W |
| Net weight | 50kg |
Standards
GB/T 50081, ASTM C39, JGJ/T 384
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the HG-1000S Digital Concrete Penetration Resistance Tester comply with?
A1: The HG-1000S Digital Concrete Penetration Resistance Tester is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the HG-1000S Digital Concrete Penetration Resistance Tester be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
Overview
The HG-1000S HG-1000S Digital Concrete Penetration Resistance Tester uses the manual penetration resistance method to determine concrete setting time, with electronic digital force display. The product complies with GB/T 50080, MOT JTGE30 and JT/T 756 standards.
Applications
• Concrete cube and cylinder compressive strength testing
• Reinforced concrete structural component assessment
• Precast concrete factory quality control
• Construction site and laboratory concrete acceptance testing
Features
• Microcomputer-controlled operation with digital display for direct readout
• Large LCD display showing real-time test parameters and results
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
| Item | Specification |
| Specimen mold | upper φ160mm, lower φ150mm, depth 150mm |
| Maximum penetration force | 1000N |
| Penetration depth | 25mm |
| Penetration speed (manual) | 2.5mm/s |
| Needle area | 100mm² / 50mm² / 20mm² |
| Penetration points (selectable) | >13 |
| Force measurement | electronic digital display |
| Minimum division | 1N |
| Indication error | ±10N |
| Power | 220V, 50Hz, 100W |
| Net weight | 50kg |
Standards
GB/T 50081, ASTM C39, JGJ/T 384
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the HG-1000S Digital Concrete Penetration Resistance Tester comply with?
A1: The HG-1000S Digital Concrete Penetration Resistance Tester is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the HG-1000S Digital Concrete Penetration Resistance Tester be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
