Electric extruder for removing soil and asphalt specimens from 50, 100 and 150 mm molds up to 230 mm high. Request a quote.
Overview
This product is mainly composed of a crossbeam, columns, tray, gearbox, motor, housing and other parts. It is suitable for various test molds with diameters of 50mm, 100mm and 150mm and a height within 230mm. It is used for demolding different sizes of test molds in geotechnical tests, with a maximum load capacity of up to 100kN.
Applications
• Road and highway engineering laboratory testing
• Construction material quality control and acceptance
• Research and teaching laboratories
• Third-party inspection and certification bodies
Features
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
Item | Specification |
Maximum demolding height | 230mm |
Rated voltage | 380V |
Maximum load | 100kN |
Demolding speed | 70 mm/min |
Screw upper limit stroke distance | 390mm |
Screw lower limit stroke distance | 200mm |
Test mold dimensions | |
φ150×230mm specimen size | 150×150mm |
φ100×180mm specimen size | 100×100mm |
φ50×130mm heavy compaction specimen size | 50×50mm |
Test cylinder volume | 24925px³, 54425px³ |
Marshall test mold | φ101.6mm×87mm |
Standards
GB/T, JTG, ASTM
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the Electric Specimen Extruder comply with?
A1: The Electric Specimen Extruder is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the Electric Specimen Extruder be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
Overview
This product is mainly composed of a crossbeam, columns, tray, gearbox, motor, housing and other parts. It is suitable for various test molds with diameters of 50mm, 100mm and 150mm and a height within 230mm. It is used for demolding different sizes of test molds in geotechnical tests, with a maximum load capacity of up to 100kN.
Applications
• Road and highway engineering laboratory testing
• Construction material quality control and acceptance
• Research and teaching laboratories
• Third-party inspection and certification bodies
Features
• Robust construction suitable for both laboratory and field use
• Compliant with relevant Chinese and international testing standards
• Complete with calibration certificate and operation manual
Technical Specifications
Item | Specification |
Maximum demolding height | 230mm |
Rated voltage | 380V |
Maximum load | 100kN |
Demolding speed | 70 mm/min |
Screw upper limit stroke distance | 390mm |
Screw lower limit stroke distance | 200mm |
Test mold dimensions | |
φ150×230mm specimen size | 150×150mm |
φ100×180mm specimen size | 100×100mm |
φ50×130mm heavy compaction specimen size | 50×50mm |
Test cylinder volume | 24925px³, 54425px³ |
Marshall test mold | φ101.6mm×87mm |
Standards
GB/T, JTG, ASTM
Standard Delivery
• Main instrument unit
• Power cable
• Operation manual
• Spare parts kit
FAQ
Q1: What standards does the Electric Specimen Extruder comply with?
A1: The Electric Specimen Extruder is designed and manufactured in accordance with relevant Chinese national (GB) and transport industry (JTG) standards, as well as applicable ASTM and AASHTO international standards. A calibration certificate traceable to national standards is provided with each unit.
Q2: How often should the Electric Specimen Extruder be calibrated?
A2: We recommend annual calibration by authorized technicians or by iRoad after-sales service center. For high-frequency laboratory use, semi-annual calibration is advised. The instrument is supplied with a factory calibration certificate.
Q3: What is the lead time and do you provide training?
A3: Standard units are usually shipped within 7-15 working days. Custom configurations may require 20-30 days. iRoad provides on-site installation, commissioning and operator training for major equipment; remote video guidance is available for standard laboratory instruments.
